Transmission Position Sensor/Switch: Service and Repair

ON-VEHICLE REPAIR
1. DISCONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR





2. REMOVE PARK/NEUTRAL POSITION SWITCH
a. Pry off the lock washer and remove the nut.
b. Remove the bolt and park/neutral position switch.
3. INSTALL PARK/NEUTRAL POSITION SWITCH
a. Install the park/neutral position switch with bolt.

Torque: 13 Nm (130 kgf-cm, 10 ft. lbs.)

b. Install a new lock plate and the nut.

Torque: 3.9 Nm (40 kgf-cm, 35 inch lbs.)

c. Bend the claws on the lock plate to fix the nut.
d. Adjust the park/neutral position switch.
4. CONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR