Tc Terminal Circuit

Tc Terminal Circuit

CIRCUIT DESCRIPTION
By connecting terminal Tc and E1 of the DLC1 the airbag sensor assembly is set in the DTC output mode. The DTC's are displayed by the blinking of the SRS warning light.
If the DTC is not displayed, do the following troubleshooting.
If the DTC is displayed without a DTC check procedure, perform the following troubleshooting.





WIRING DIAGRAM

INSPECTION PROCEDURE

Step 1:

Step 2:

Step 3:

Step 4:

IF DTC IS NOT DISPLAYED

Step 1:

IF DTC IS DISPLAYED WITHOUT PERFORMING DTC CHECK PROCEDURE