System Specifications
CHARGING SYSTEM (5VZ-FE) / SERVICE DATADRIVE BELT
Belt tension gauge:
Nippondenso BTG-20 (95506-00020)
Borroughs No. BT-33-73F
Drive belt tension:
New belt 160 ± 20 lb.
Used belt 100 ± 20 lb.
CHARGING SYSTEM (3RZ-FE) / TORQUE SPECIFICATIONS
Generator x Generator Bracket 51 N.m (38 ft.lb.)
Generator x Adjusting Lever 18.5 N.m (25 ft.lb.)
Rectifier End Frame x Drive End Frame 4.5 N.m (39 in.lb.)
Generator Pulley x Rotor 110 N.m (81 ft.lb.)
Drive End Frame x Voltage Regulator 2.0 N.m (17 in.lb.)
Generator Rear End Cover x Rectifier End Frame 4.5 N.m (39 in.lb)
Terminal Insulator x Rectifier Holder 4.1 N.m (36 in.lb.)
CHARGING SYSTEM (5VZ-FE) / SERVICE DATA
Slip Ring Diameter:
STD 14.2mm-14.4mm (0.559-0.5567in.).
Minimum 12.8mm (0.504in.).
Brush Exposed Length:
STD 10.5mm (0.453in.).
Minimum 1.5mm (0.59in.).