General Torque Specifications

TIGHTENING TORQUE SPECIFICATIONS

TORQUE CHART








Intake Manifold Tightening Specifications
Intake Manifold To Cylinder Head 18 Nm (13 ft. lbs.)
Intake Manifold Stay To Cylinder Head 18 Nm (13 ft. lbs.)

Water Pump Tightening Specifications
Water Pump To Cylinder Block 20 Nm (14 ft. lbs.)
Water Inlet To Water Pump 20 Nm (14 ft. lbs.)

Oil Pump Tightening Specifications




Oil Pump To Cylinder Block
A 20 Nm (15 ft. lbs.)
B 42 Nm (31 ft. lbs.)
Oil Pump To Oil Pump Body Cover 10 Nm (8 ft. lbs.)


TORQUE SEQUENCES

Camshaft Bearing Cap Removal Sequences

Right Side Cylinder Head Exhaust Camshaft




Right Side Cylinder Head Intake Camshaft




Left Side Cylinder Head Exhaust Camshaft




Left Side Cylinder Head Intake Camshaft





Camshaft Bearing Cap Tightening Sequences

Right Side Cylinder Head Intake Camshaft




Right Side Cylinder Head Exhaust Camshaft




Left Side Cylinder Head Intake Camshaft




Left Side Cylinder Head Exhaust Camshaft






Note: Proper removal and installation procedures are essential to camshaft durability and to avoid damage. Refer to Camshaft, Engine; Service and Repair for detailed camshaft removal and installation procedures.


Cylinder Head Bolt Removal Sequence








Cylinder Head Bolt Tightening Sequence







Note: If any of the cylinder head bolts does not meet the torque specification, replace the cylinder head bolt.


Main Bearing Cap Bolts Removal Sequence





Main Bearing Cap Bolts Tightening Sequence





Flywheel/Drive Plate Bolt Tightening Sequence

Sequence:

See also: Refer to Diagrams/Exploded Views at component level.