Alignment

GENERAL SPECIFICATIONS
Front Wheel Alignment
Camber:
Nominal -0.17°
Range +0.58° to -0.92°
Left-Right Error 0.5° or less.

Caster:
Nominal +2.42°
Range +1.67° to +3.17°
Left-Right Error 0.5°

Steering Axis Inclination:
Nominal 10.58°
Range 9.83° to 11.33°
Left-Right Error 0.5°

Toe-In:
A+B:
Nominal 0.2°
Range 0.0° to 0.4°
C+D:
Nominal 0.08 inch
Range 0.0 inch to 0.16 inch

Wheel Angle:
Inside Wheel:
Nominal 36°
Range 34° to 37°
Outside Wheel:
Reference 32°

Vehicle Height [1]:
A-B 47.5 mm (1.870 inch)
C-D 29.4 mm (1.157 inch)

[1] Measuring points are as follows:
A Ground clearance of spindle center
B Ground clearance of front adjusting cam bolt center
C Ground clearance of rear axle shaft center
D Ground clearance of lower control arm front bushing center