Service Hints

C 3 CRUISE CONTROL ACTUATOR WITH ECU
9,10-GROUND: Always continuity
14-GROUND: Approx. 12 Volts with Ignition SW at ON position
7-GROUND: 4 pulse with 1 rotation of rotor shaft
15-GROUND: Continuity with Main SW ON
2-GROUND: Approx. 12 Volts with Brake Pedal not depressed
6-GROUND: Approx. 12 Volts with Brake Pedal depressed (One of the Cancel SW)
13-GROUND: Approx. 12 Volts with Ignition SW at ON position and Clutch Pedal not depressed (M/T)
Approx. 12 Volts with Ignition SW at ON position and Shift Lever in D position (A/T)

C14 CRUISE CONTROL SW [COMB. SW]
1-7: Closed with Main SW ON
1-2: Approx. 68 Ohms with Resume/Accel SW ON
Approx. 198 Ohms with Set/Coast SW ON
Approx. 418 Ohms with cancel SW ON