Coolant Temperature Sensor/Switch (For Computer): Service and Repair

COMPONENTS FOR REMOVAL AND INSTALLATION

ECT SENSOR REMOVAL

1. REMOVE NO.2 TIMING BELT COVER





2. REMOVE FUEL PIPE
3. REMOVE ECT SENSOR
(a) Disconnect the ECT sensor connector.





(b) Using a 19 mm deep socket wrench, remove the ECT sensor and gasket.

ECT SENSOR INSTALLATION

1. INSTALL ECT SENSOR
(a) Install a new gasket to the ECT sensor.
(b) Using a 19 mm deep socket, install the ECT sensor.

Torque: 20 N.m (200 kgf.cm, 14 ft.lbf)

(c) Connect the ECT sensor connector.
2. REINSTALL FUEL PIPE
Install the fuel pipe with 4 new gaskets and the 2 union bolts.

Torque: 34.3 N.m (350 kgf.cm, 25 ft.lbf)

3. REINSTALL NO.2 TIMING BELT COVER