Manifold Gauge Installation/Removal

MANIFOLD GAUGE SET - CONNECTION







1. CONNECT CHARGING HOSES TO MANIFOLD GAUGE SET
Tighten the nuts by hand.

CAUTION: Do not connect the wrong hoses.

2. CONNECT QUICK DISCONNECT ADAPTERS TO CHARGING HOSES
Tighten the nuts by hand.

3. CLOSE BOTH HAND VALVES OF MANIFOLD GAUGE SET

4. REMOVE CAPS FROM SERVICE VALVES ON REFRIGERANT LINE







5. CONNECT QUICK CONNECTORS TO SERVICE VALVES

HINT: Push the quick connector onto the service valve. then slide the sleeve of the quick connector downward to lock it.

MANIFOLD GAUGE SET DISCONNECTION







1. CLOSE BOTH HAND VALVES OF MANIFOLD GAUGE SET

2. DISCONNECT QUICK DISCONNECT ADAPTERS FROM SERVICE VALVES ON REFRIGERANT LINE

HINT: Slide the sleeve of the quick connector upward to unlock the connector and remove it from the service valve.

3. INSTALL CAPS TO SERVICE VALVES ON REFRIGERANT LINE