M/T Torque Data

SERVICE SPECIFICATIONS
Front Bearing Retainer (From Retainer End):
Oil Seal Drive In Depth 11.7 +/- 0.5 mm (0.461 +/- 0.020 inch)

TORQUE SPECIFICATIONS
Transmission To:
Engine 72 Nm (53 ft. lbs.)
Stiffener Plate 37 Nm (27 ft. lbs.)
Starter 39 Nm (29 ft. lbs.)
Engine Rear Mounting 65 Nm (48 ft. lbs.)
Clutch Release Cylinder 12 Nm (108 ft. lbs.)
Transfer Case 37 Nm (27 ft. lbs.)
Reverse Shift Arm Bracket Set Bolt 18 Nm (13 ft. lbs.)
Rear Bearing Retainer To:
Intermediate Plate 18 Nm (13 ft. lbs.)
Back-Up Light Switch 44 Nm (32 ft. lbs.)