Output Shaft, Transfer Case

Rear Output Shaft Assembly:
Drive Sprocket Thrust Clearance:
Standard 0.10-0.25 mm (0.0039-0.0098 inch)
Maximum 0.25 mm (0.0098 inch)





Rear Shaft Journal Diameter:
Part A:
Minimum 27.98 mm (1.1016 inch)
Part B:
Minimum 36.99 mm (1.4563 inch)
Drive Sprocket Radial Clearance:
Standard 0.010-0.055 mm (0.0022 inch)
Maximum 0.055 mm (0.0022 inch)
Front Drive Shift Fork To Clutch Sleeve Clearance:
Maximum 1.0 mm (0.039 inch)
High and Low Shift Fork To Clutch Sleeve Clearance:
Maximum 1.0 mm (0.039 inch)