Body and Frame: Description and Operation

Current always flows to TERMINAL 2 of the Door Lock Control Relay through the POWER fuse.

1. MANUAL LOCK OPERATION
To push Door Lock Control SW or Key Lock and Unlock SW to LOCK position, a lock signal is input to TERMINAL 4 of the Door Lock Control Relay and causes the relay to function. Current flows from TERMINAL 2 of the Relay --> TERMINAL 6 --> TERMINAL 3 (LH), 2 (RH) of the Door Lock Motors --> TERMINAL 7 (LH), 6 (RH) --> TERMINAL 1 of the Relay --> TERMINAL 11 --> to GROUND and the Door Lock Motor causes the Door to Lock.

2. MANUAL UNLOCK OPERATION
To push Door Lock Control SW or Door Key Lock and Unlock SW to UNLOCK position, an Unlock signal is input to TERMINAL 3 of the Door Lock Control Relay and causes the Relay to function. Current flows from TERMINAL 2 of the Relay --> TERMINAL 1 --> TERMINAL 7 (LH), 6 (RH) of the Door Lock Motors --> TERMINAL 3 (LH). 2 (RH) --> TERMINAL 6 of the Relay --> TERMINAL 11 --> to GROUND and the Door Lock Motor causes the Door to Unlock.

3. IGNITION KEY REMINDER OPERATION
^ Operating Door Lock knob (In Door Lock Motor Operation)
With Ignition key in Cylinder (Unlock Warning SW ON), when the Door is opened and locked using Door Lock knob (Door Lock Motor), the Door is locked once but each Door is unlocked soon by the function of Relay. As a result, the current flows from TERMINAL 2 of the Relay --> TERMINAL 1 --> TERMINAL 7 (LH), 6 (RH) of the Door Lock Motors --> TERMINAL 3 (LH), 2 (RH) --> TERMINAL 6 of the Relay --> TERMINAL 11 --> to GROUND and causes all the Doors to unlock.

^ Operating Door Lock Control SW or Door Key Lock and Unlock SW
With Ignition Key in Cylinder (Unlock Warning SW ON), when the Door is opened and locked using Door Lock Control SW or Door Key Lock and Unlock SW, the Door Lock is locked once but each Door is unlocked by the function of SW contained in motor, which inputs the signal to TERMINAL 9 or 12 of the Relay. According to this input signal, the current in Relay flows from TERMINAL 2 of the Relay --> TERMINAL 1 --> TERMINAL 7 (LH), 6 (RH) of the Door Lock Motors --> TERMINAL 3 (LH), 2 (RH) --> TERMINAL 6 of the Relay --> TERMINAL 11 --> to Ground and causes all the Doors to unlock.