Output Shaft, M/T

Gear Thrust Clearance
Standard
1st gear 0.15-0.45 mm (0.0059-0.0177 inch)
2nd and 3rd gears 0.10-0.25 mm (0.0039-0.0098 inch)
Maximum
1st gear 0.50 mm (0.0197 inch)
2nd and 3rd gears 0.30 mm (0.0118 inch)
Gear Radial Clearance
Standard:
1st Gear 0.020-0.073 mm (0.0008-0.0029 inch)
2nd and 3rd Gears 0.015-0.068 mm (0.0006-0.0027 inch)
Maximum:
1st Gear 0.160 mm (0.0063 inch)
2nd and 3rd Gears 0.160 mm (0.0063 inch)
Output Shaft Journal
Minimum Diameter:
1st gear 38.860 mm (1.5299 inch)
2nd gear 46.860 mm (1.8449 inch)
3rd gear 37.860 mm (1.4905 inch)
Shaft Runout.
Maximum 0.06 mm (0.0024 inch)
Clearance Between The Synchronizer Ring Back And Gear Spline End.
Minimum 0.8 mm (0.031 inch)
Flange Thickness 4.70 mm (0.1850 inch)