Power Steering Gear

SERVICE SPECIFICATIONS
Rack Runout: 0.30 mm (0.0118 inch) Max
Total (Turning) Preload: 0.5 - 1.6 Nm (4.3 - 14.3 inch lbs.)

TIGHTENING SPECIFICATIONS
2 Control Valve Housing Bolts: 18 Nm (13 ft. lbs.)
Control Valve Assembly Nut: 25 Nm (18 ft. lbs.)
Cylinder End Stopper: 59 Nm (43 ft. lbs.)
Gear Assembly Set Bolt:
Bolt (A): 167 Nm (123 ft. lbs.)
Bolt (B): 191 Nm (141 ft. lbs.)
Bolt (C): 167 Nm (123 ft. lbs.)
Pressure Tubes:
At Gear End: 20 Nm (15 ft. lbs.)
At Opposite End Of Gear:
Pressure Feed Tube: 36 Nm (26 ft. lbs.)
Return Tube: 40 Nm (29 ft. lbs.)
Rack End: 76 Nm (56 ft. lbs.)
Rack Guide Spring Cap: 25 Nm (18 ft. lbs.)
Rack Guide Spring Cap Lock Nut: 51 Nm (38 ft. lbs.)