Intermittent Wiper Operation

Intermittent Wiper Operation
1. Turn the wiper switch to INT position.

2. Variable Type:
Turn the intermittent time control switch to FAST position.







3. Connect the positive (+) lead from the battery to terminal B18 and the negative (-) lead to terminal B16.
4. Connect the positive (+) lead from the voltmeter to terminal B7 and the negative (-) lead to terminal B16, and check that the meter needle indicates battery positive voltage.







5. After connecting terminal B4 to terminal B18, connect to terminal B16.







Then, check that the voltage rises from 0 volts to battery positive voltage within the time, as shown in the table.

If operation is not as specified, replace the wiper and washer switch.