Removal and Installation

REMOVAL

1. DISCONNECT ANTENNA CABLE
a. Remove the radio and disconnect the antenna cable.
b. Disconnect the antenna cable from the 4 clamps.




2. REMOVE ANTENNA NUT AND ORNAMENT
3. w/o Wheel Opening Extension:

REMOVE FENDER LINER
Remove the clips and fender liner.




4. W/ Wheel Opening Extension:

REMOVE FENDER LINER
a. Remove the 3 clips.
b. Pull the fender liner.

HINT: The following operations should be done by the 2 persons.




5. REMOVE ANTENNA ASSEMBLY
a. Auto Antenna models:
Disconnect the connector.
b. Remove the bolt and antenna assembly.

INSTALLATION
Installation is in the reverse order of removal.