Disassembly

DISASSEMBLY

1. REMOVE VALVE LIFTERS AND SHIMS

HINT: Arrange the valve lifters and shims in correct order.

2. REMOVE VALVES





a. Using Special Service Tool (SST), compress the valve spring and remove the 2 keepers.
SST 09202 - 70020 (09202 - 00010)
b. Remove the spring retainer, valve spring and valve.





c. Using needle-nose pliers, remove the oil seal.





d. Using compressed air and a magnetic finger, remove the spring seat by blowing air.

HINT: Arrange the valves, valve springs, spring seats and spring retainers in correct order.