Service Hints
C 3 CRUISE CONTROL ACTUATOR3-4: Approx. 38.5 Ohms
C13 CRUISE CONTROL SW (COMB. SW)
5-3: Continuity with the CRUISE SW ON
4-3: Approx. 418 Ohms with the CANCEL SW ON
Approx. 68 Ohms with the RESUME/ACCEL SW ON
Approx. 198 Ohms with the SET/COAST SW ON
C15 CRUISE CONTROL ECU
9-GROUND: Approx. 12 Volts with the ignition SW at ONposition
1-GROUND: Always approx. 12 Volts
12-GROUND: 4 pulses with 1 rotation of the rotor shaft
10-GROUND: Approx. 418 Ohms with the CANCEL SW ON in the control SW
Approx. 198 Ohms with the SET/COAST SW ON in the control SW
Approx. 68 Ohms with the RESUME/ACCEL SW ON in the control SW
16-GROUND: Always continuity