Service Hints

C 3 CRUISE CONTROL ACTUATOR With ECU
9, 10-GROUND: Always continuity
4-GROUND: Approx. 12 Volts with ignition SW at ONposition
7-GROUND: 4 pulse with 1 rotation of the rotor shaft
15-GROUND: Continuity with MAIN SW ON
2-GROUND: Approx. 12 Volts with brake pedal not depressed
6-GROUND: Approx. 12 Volts with brake pedal depressed (One of the CANCEL SW)
13-GROUND: Approx. 12 Volts with ignition SW at ONposition and clutch pedal not depressed (M/T)
Approx. 12 Volts with ignition SW at ONposition and shift lever in D position (A/T)

C14 CRUISE CONTROL SW (COMB. SW)
1-7: Closed with MAIN SW ON
1-2: Approx. 68 Ohms with RESUME/ACCEL SW ON
Approx. 198 Ohms with SET/COAST SW ON
Approx. 418 Ohms with CANCEL SW ON