Daytime Running Lamp Relay: Testing and Inspection

Terminal Identification:

INSPECT DAY TIME RUNNING LIGHT RELAY CIRCUIT
Connector Disconnected
Disconnect the connector from the relay and inspect the connector on the wire harness side.
If circuit is as specified, perform inspections.







INSPECT DAYTIME RUNNING LIGHT RELAY CIRCUIT
Connector Connected
Connect the wire harness side connector to the relay and inspect wire harness side connector from the back side, as shown.
If circuit is as specified, trying replacing the relay with a new one.







INSPECT DAYTIME RUNNING LIGHT RELAY No.4 CONTINUITY
If continuity is not as specified, replace the relay.