Front

REMOVAL





1. Disconnect speed sensor connector.
2. Remove speed sensor.
a. 4WD: Remove the 3 clamp bolts holding the sensor harness from the frame, upper arm and steering knuckle.
b. 2WD: Remove the 2 clamp bolts holding the sensor harness from the frame and upper arm.
Torque: 5.0 Nm (44 inch lbs.)
c. Remove the speed sensor from the steering knuckle.
Torque: 8.0 Nm (71 inch lbs.)

INSTALLATION
Installation is reverse in the order of removal. After installation, check speed sensor signal.