Vehicle Speed Sensor: Service and Repair

VEHICLE SPEED SENSOR NO.1 REPLACEMENT

To replace vehicle speed sensor no.1 the instument cluster must be removed SEE:Instrument Cluster/CarrierInstrument Cluster / Carrier


VEHICLE SPEED SENSOR NO.2 REPLACEMENT



ON-VEHICLE REPAIR
1. DISCONNECT NO.2 VEHICLE SPEED SENSOR CONNECTOR
2. REMOVE NO.2 VEHICLE SPEED SENSOR





a. A340E: Remove the bolt and No.2 vehicle speed sensor.





b. A340F: Remove the bolt and No.2 vehicle speed sensor.
c. Remove the O-ring from it.
3. INSTALL NO.2 VEHICLE SPEED SENSOR
a. Coat a new O-ring with Automatic Transmission Fluid (ATF) and install it to the vehicle speed sensor.
b. Install the speed sensor and torque the bolt.

Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)

4. CONNECT NO.2 VEHICLE SPEED SENSOR CONNECTOR