Stabilizer Bar: Service and Repair

REMOVAL
1. Remove front wheel.
Torque: 103 Nm (76 ft. lbs.).
2. Remove stabilizer bar.





a. Remove the two nuts, retainers, cushions and stabilizer bar from the lower suspension arms.
Torque: 13 Nm (9 ft. lbs.).





b. Remove the two nuts, cushions, retainers and disconnect the stabilizer bar.
Torque: 13 Nm (9 ft. lbs.).
c. Remove the four bolts, stabilizer bar brackets, bushings and remove the stabilizer bar.
Torque: 30 Nm (22 ft. lbs.).

INSTALLATION
Installation is in the reverse order of removal.