Removal and Installation

COMPONENTS

REMOVAL




1. REMOVE DRIVE BELT
a. Loosen the lock bolt, pivot bolt, nut and adjusting bolt
b. Remove the drive belt.

2. REMOVE GENERATOR
a. Disconnect the generator connector.
b. Remove the nut, and disconnect the generator wire.
Torque: 9.8 N.m (100 kgf.cm, 7.2 ft.lbf)
c. Disconnect the wire harness with the clip.




d. Remove the lock bolt, pivot bolt, nut and generator.
Torque:
Pivot bolt: 59 N.m (600 kgf.cm, 43 ft.lbf)
Lock bolt: 29 N.m (300 kgf.cm, 21 ft.lbf)

INSTALLATION
Installation is in the reverse order of removal.