With Non-Tilt Steering Column

Assembly Set Nut And Bolt 26 Nm (19 ft. lbs.)
Main Shaft Assembly To Sliding Yoke 35 Nm (26 ft. lbs.)
Sliding Yoke To Intermediate No.2 Shaft 35 Nm (26 ft. lbs.)
Control Valve Shaft To:
Intermediate No.2 Shaft 35 Nm (26 ft. lbs.)
Column Hole Cover To Body 8 Nm (69 inch lbs.)
Column Shift Lever Assembly To:
Column Tube 8 Nm (71 inch lbs.)
Turn Signal Bracket Set Bolt 3 Nm (26 inch lbs.)