TMC Made

Assembly Set Nut And Bolt 26 Nm (19 ft. lbs.)
Main Shaft Assembly To Sliding Yoke 35 Nm (26 ft. lbs.)
Sliding Yoke To Intermediate No.2 Shaft 35 Nm (26 ft. lbs.)
Control Valve Shaft To:
Intermediate No.2 Shaft 35 Nm (26 ft. lbs.)
Column Hole Cover To Body 8 Nm (69 inch lbs.)
Tilt Lever Retainer Set Nut 20 Nm (14 ft. lbs.)