Front

SERVICE SPECIFICATIONS
Drive Pinion Preload (At Starting):
New Bearing 1.2-1.9 Nm (10.4-16.5 inch lbs.)
Reused Bearing 0.6-1.0 Nm (5.2-8.7 inch lbs.)
Drive Pinion To Ring Gear:
Backlash 0.13-0.18 mm (0.0051-0.0071 inch)

TORQUE SPECIFICATIONS
Drive Pinion To Companion Flange:
Standard 108 Nm (80 ft. lbs.)
Maximum 223 Nm (165 ft. lbs.)