Service Hints

C 3 CRUISE CONTROL ACTUATOR
3-4: Approx. 38.5 Ohms

C13 CRUISE CONTROL SW (COMB. SW)
5-3: Continuity with the CRUISE SW ON
4-3: Approx. 1540 Ohms with the CANCEL SW ON
Approx. 240 Ohms with the RESUME/ACCEL SW ON
Approx. 530 Ohms with the SET/COAST SW ON

C15 CRUISE CONTROL ECU
9-GROUND: Approx. 12 Volts with the ignition SW at ONposition
1-GROUND: Always approx. 12 Volts
12-GROUND: 4 pulses with 1 rotation of the rotor shaft
10-GROUND: Approx. 1540 Ohms with the CANCEL SW ON in the control SW
Approx. 630 Ohms with the SET/COAST SW ON in the control SW
Approx. 240 Ohms with the RES/ACC SW ON in the control SW
16-GROUND: Always continuity