System Inspection

Sliding Roof System

1. INSPECT SLIDING ROOF MOTOR CONTINUITY




a. Connect the positive (+) lead from the battery to terminal 2 and the negative (-) lead to terminal 1 and check that the motor turns clockwise.




b. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 2 and check that the motor turns counterclockwise.
If operation is not as specified, replace the motor.







2. INSPECT SLIDING ROOF CONTROL RELAY CIRCUIT
Disconnect the connector from the relay and inspect the connector on the wire harness side, as shown in the chart.







3. INSPECT LIMIT SWITCH CONTINUITY
If continuity is not as specified, replace the switch.