Rear Heater Control

REMOVAL

1. REMOVE REAR CONSOLE BOX




2. REMOVE HEATER CONTROL ASSEMBLY
a. Disconnect the control cable.

HINT: At the time of installation, please refer to the following item.
For installing the control cable refer to "INSTALLATION".

b. Remove the screw and heater control assembly.

INSTALLATION
Installation is in the reverse order of removal

1. AFTER INSTALLATION, CHECK HEATER CONTROL LEVER OPERATION
Move the control lever left and right check for stiffness and binding the full range of the lever.
If there is stiffness or binding, proceed next step




2. ADJUST HEATER CONTROL CABLE
a. Set damper control lever to "WARM" position.
b. Set the rear heater control lever to "WARM" position, install the control cable and lock the clamp.

HINT: Lock the clamp during lightly pushing the outer cable in the direction, as shown in the illustration by an arrow.