Transmission Temperature Sensor/Switch: Service and Repair

ON-VEHICLE REPAIR





1. DISCONNECT ATF TEMPERATURE SENSOR CONNECTOR
2. REMOVE ATF TEMPERATURE SENSOR
a) Remove the ATF temperature sensor.
b) Remove the O-ring from the ATF temperature sensor.
3. INSTALL ATF TEMPERATURE SENSOR
a) Coat a new O-ring with ATF and install it to the ATF temperature sensor.
b) Install the ATF temperature sensor.
Torque: 15 Nm (150 kgf-cm, 11 ft. lbs.)
4. CONNECT ATF TEMPERATURE SENSOR CONNECTOR

NOTICE: Be careful not to twist the wire harness.