Front Wiper And Washer

Front Wiper And Washer Components:

REMOVAL

1. REMOVE WIPER ARMS
Remove the 2 caps, 2 nuts and wiper arms.
2. REMOVE COWL LOUVER
Remove the 6 screws, 4 clips and cowl louver.





3. REMOVE WIPER MOTOR
Unfasten the 4 bolts and wiper motor.
4. REMOVE WIPER LINK
Remove the 6 bolts and wiper link.
5. REMOVE WINDOW WASHER NOZZLES

INSTALLATION

1. INSTALL WINDOW WASHER NOZZLES
2. INSTALL WIPER LINK
Install the wiper link with the 6 bolts.

Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)




3. INSTALL WIPER MOTOR
Install the wiper motor and fasten the 4 bolts.

Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)

4. INSTALL COWL LOUVER
Install the cowl louver with the 6 screws and 4 clips.
5. INSTALL WIPER ARMS
a. Operate the wipers once and turn the wiper switch OFF.
b. Install the wiper arms and tighten the 2 nuts by hand.




c. Adjust the installation positions of the wiper arms to the positions shown in the illustration.

A: Approx. 25 mm (0.98 in.)

d. Torque the 2 nuts.

Torque: 20 N.m (205 kgf.cm, 15 ft.lbf)

e. Install the 2 caps.