Removal and Installation

COMPONENTS

REMOVAL

CAUTION: Do not smoke or work near an open flame when working on the fuel pump.

1. REMOVE FUEL TANK

HINT: At the time of installation, please refer to the following items.
Check for fuel leakage.




2. DISCONNECT FUEL TUBE (FUEL TUBE CONNECTOR)

CAUTION: Perform disconnecting and connecting operations of the fuel tube connector (quick type) after observing the precautions.

3. REMOVE FUEL PUMP ASSEMBLY FROM FUEL TANK




a. Remove the 8 bolts and fuel tank vent tube set plate.
Torque: 4 Nm (40 kg.cm, 35 in.lb)




b. Pull out the fuel pump assembly.
c. Remove the gasket from the pump assembly.

NOTE:
- Do not damage the fuel pump filter.
- Be careful that the arm of the sender gauge should not bent.

HINT: At the time of installation, please refer to the following items.
Install a new gasket to the pump assembly.

INSTALLATION
Installation is in the Reverse order of Removal.