Headlamp Switch: Testing and Inspection
INSPECT LIGHT-OFF CONDITIONa. Turn the ignition switch ON.
b. Gradually cover the top of the sensor.
Lights auto ON:
c. Verify that the lights will go out when light control switch position is OFF or the area surrounding the sensor gets bright or opening the driver's door while the ignition switch is OFF.
INSPECT LIGHT-ON CONDITION
a. Open the driver's door while the ignition switch is OFF.
b. Turn the light control switch to AUTO leaving the door open and cover the top of the sensor, and verify that the lights go on when the ignition switch is turned ON.
ADJUST AUTOMATIC LIGHT CONTROL SENSOR
a. Adjustment of the light control is performed by turning the sensitivity knob on the sensor.
b. This will determine at what light condition the automatic control will take place.
- If response is too quick, turn the knob counterclockwise.
- If response is too slow, turn the knob clockwise.