Disassembly and Reassembly

DISASSEMBLY

1. REMOVE FUEL PUMP LEAD WIRE

2. REMOVE FUEL SENDER GAUGE FROM FUEL PUMP BRACKET
a. Disconnect the fuel sender gauge connector.
b. Remove the 2 screws and sender gauge.




3. REMOVE FUEL PUMP FROM FUEL PUMP BRACKET
a. Pull off the lower side of the fuel pump from the pump bracket.
b. Disconnect the fuel hose from the fuel pump, and remove the fuel pump.
c. Remove the rubber cushion from the fuel pump.




4. REMOVE FUEL PUMP FILTER FROM FUEL PUMP
a. Using a small screwdriver, remove the clip.
b. Pull out the pump filter.

HINT: At the time of assembly please refer to the following items.
Install the pump filter with a new clip.




5. REMOVE CONNECTOR
Remove the 2 screws, connector support, connector and gasket.

HINT: At the time of assembly please refer to the following items.
Install the connector with a new gasket.

REASSEMBLY
Reassembly is in the reverse order of disassembly.