Speed Sensor, Front

REMOVAL





1. REMOVE FRONT WHEEL
Torque: 113 Nm (1,150 kgf-cm, 83 ft. lbs.)
2. DISCONNECT SPEED SENSOR CONNECTOR
3. REMOVE SPEED SENSOR
a. Remove the clips and 3 clamp bolts holding the sensor harness from the frame, upper arm and steering knuckle.
Torque: 8.0 Nm (82 kgf-cm, 71 inch lbs.)
b. Remove the bolt and speed sensor from the steering knuckle.
Torque: 8.0 Nm (82 kgf-cm, 71 inch lbs.)


INSTALLATION
Installation is in the reverse order of removal.

HINT: After installation, check speed sensor signal.