Vehicle Speed Sensor: Service and Repair

Vehicle Speed Sensor NO.1:

1. DISCONNECT NO. 1 VEHICLE SPEED SENSOR CONNECTOR






2. REMOVE NO. 1 VEHICLE SPEED SENSOR

Remove the bolt and No.1 vehicle speed sensor.

3. DISASSEMBLE NO. 1 VEHICLE SPEED SENSOR

a. Remove the O-ring from the speedometer driven gear assembly.
b. Remove the clip and speedometer driven gear from the speedometer driven gear sleeve.

4. ASSEMBLE NO. 1 VEHICLE SPEED SENSOR

a. Install the speedometer driven gear and clip to the speedometer driven gear sleeve.
b. Coat a new O-ring with ATF.
c. Install the O-ring to the speedometer driven gear assembly.

5. INSTALL NO. 1 VEHICLE SPEED SENSOR

Install the No.1 vehicle speed sensor with the bolt.

Torque: 16 Nm (160 kgf-cm, 12 ft. lbs.)

6. CONNECT NO. I VEHICLE SPEED SENSOR CONNECTOR

Vehicle Speed Sensor NO.2:

Vehicle speed Sensor NO.2 on-vehicle repair


1. DISCONNECT NO. 2 VEHICLE SPEED SENSOR CONNECTOR






2. REMOVE NO. 2 VEHICLE SPEED SENSOR

a. Remove the bolt and No. 2 vehicle speed sensor.
b. Remove the O-ring from the No. 2 vehicle speed sensor.

3. INSTALL NO. 2 VEHICLE SPEED SENSOR

a. Coat a new O-ring with ATF and install it to the No. 2 vehicle speed sensor.
b. Install the No. 2 vehicle speed sensor with the bolt.

Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)

4. CONNECT NO. 2 VEHICLE SPEED SENSOR CONNECTOR