Component Tests and General Diagnostics

INSPECTION







1. INSPECT DRIVER DOOR KEY LOCK AND UNLOCK SWITCH CONTINUITY
If continuity is not as specified, replace the door lock motor.







2. INSPECT PASSENGER'S DOOR KEY LOCK AND UNLOCK SWITCH CONTINUITY
If continuity is not as specified, replace the door lock motor.







3. INSPECT DRIVER'S DOOR UNLOCK DETECTION SWITCH CONTINUITY
If continuity is not as specified, replace the door lock motor.







4. INSPECT PASSENGER'S DOOR UNLOCK DETECTION SWITCH CONTINUITY
If continuity is not as specified, replace the door lock motor.







5. INSPECT REAR DOOR UNLOCK DETECTION SWITCH CONTINUITY
If continuity is not as specified, replace the door lock motor.




6. INSPECT DRIVER'S DOOR LOCK MOTOR OPERATION
a. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 2, and check that the door lock cable moves to UNLOCK position.
b. Reverse the polarity and check that the door lock cable moves to LOCK position.
If operation is not as specified, replace the door lock motor.




7. INSPECT PASSENGER'S DOOR LOCK MOTOR OPERATION
a. Connect the positive (+) lead from the battery to terminal 5 and the negative (-) lead to terminal 6, and check that the door lock cable moves to UNLOCK position.
b. Reverse the polarity and check that the door lock cable moves to LOCK position.
If operation is not as specified, replace the door lock motor.




8. INSPECT REAR LEFT SIDE DOOR LOCK MOTOR OPERATION
a. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 2, and check that the door lock cable moves to UNLOCK position.
b. Reverse the polarity and check that the door lock cable moves to LOCK position.
If operation is not as specified, replace the door lock motor.




9. INSPECT REAR RIGHT SIDE DOOR LOCK MOTOR OPERATION
a. Connect the positive (+) lead from the battery to terminal 3 and the negative (-) lead to terminal 4, and check that the door lock cable moves to UNLOCK position.
b. Reverse the polarity and check that the door lock cable moves to LOCK position.
If operation is not as specified, replace the door lock motor.




10. INSPECT BACK DOOR LOCK MOTOR OPERATION
a. Connect the positive (+) lead from the battery to terminal 3 and the negative (-) lead to terminal 4, and check that the door lock cable moves to UNLOCK position.
b. Reverse the polarity and check that the door lock cable moves to LOCK position.
If operation is not as specified, replace the door lock motor.







11. INSPECT BACK DOOR UNLOCK DETECTION SWITCH CONTINUITY
If continuity is not as specified, replace the back door lock motor.







12. INSPECT BACK DOOR KEY LOCK AND UNLOCK CONTROL SWITCH CONTINUITY
If continuity is not as specified, replace the switch.