Rear No.1 Seat (RH)

DISASSEMBLY

1. REMOVE HEADREST
2. REMOVE RECLINING ADJUSTER RELEASE HANDLE
3. REMOVE NO. 1 REAR SEAT RECLINING COVER




a. Remove the screw and No. 1 rear seat reclining cover.
b. Employ the same manner described above to the other side.

4. REMOVE SEATBACK ASSEMBLY
Remove the 4 bolts and seatback assembly.

Torque: 43 N.m (440 kgf.cm, 32 ft.lbf)

5. REMOVE SEATBACK COVER
a. Remove the headrest supports.
b. Remove the seatback frame from the seatback cover with pad.
c. Remove the seatback cover from the seatback pad.

6. REMOVE REAR SEAT CUSHION UNDER COVER




a. Remove the screw and cushion.
b. Remove the 7 screws and rear seat cushion under cover.
c. Remove the screw and fold seat stopper band.

7. REMOVE LH REAR SEAT RECLINING ADJUSTER AND REAR SEAT LOCK




a. Unfasten the bolt, then remove the rear No. 1 seat inner belt.

Torque: 42 N.m (430 kgf.cm, 31 ft.lbf)

b. Remove the bolt, 2 nut and LH rear seat reclining adjuster with rear seat lock.

Torque:
bolt: 43 N.m (440 kgf.cm, 32 ft.lbf)
nut: 43 N.m (440 kgf.cm, 32 ft.lbf)

c. Using a screwdriver, remove the E-ring, then remove the LH rear seat reclining adjuster from the rear seat lock.

8. REMOVE RECLINING CONNECTING PIPE
9. REMOVE RH REAR SEAT RECLINING ADJUSTER
Remove the 2 nuts and RH rear seat reclining adjuster.

Torque: 43 N.m (440 kgf.cm, 32 ft.lbf)

10. REMOVE SEAT CUSHION COVER
a. Remove the seat cushion cover with pad from the seat cushion frame.
b. Remove the seat cushion cover from the seat cushion pad.

11. REMOVE REAR SEAT CUSHION HINGE
a. Using a screwdriver, remove the E-ring.
b. Remove the pin, bushings, spring, collar and rear seat cushion hinge.
c. Employ the same manner described above to the other side.

REASSEMBLY
Reassembly is in the reverse order of disassembly.