Clearing Diagnostic Trouble Codes

NOTE: This is the only information provided by the manufacturer for reading diagnostic trouble codes for this system.


HINT:
- Diagnosis mode can be finished from any mode.Displaying and Reading Trouble Codes

- When finishing the diagnosis mode, ECU memory is erased. Accordingly initializing is necessary.

INITIALIZE POWER SLIDE DOOR CONTROL SYSTEM.
a. Disconnect the battery negative (-) terminal for more than 1 mm., and connect it.
b. Close the RH slide door manually.
c. Push the power slide door MAIN switch ON and wait for 5 secs.
d. Fully open the slide door by the power slide door control switch and wait for 3 secs.
e. Fully close the slide door by the power slide door control switch and wait for 3 secs.
f. Repeat the step (d) and (e).