Service Hints
C3 CRUISE CONTROL ACTUATOR3 - 4 : Approx. 38.5 ohm
C13 CRUISE CONTROL SW [COMB. SW]
5 - 4 : Continuity with the CRUISE SW on
5 - 4 : Approx. 1540 ohm with the CANCEL SW on
Approx. 240 ohm with the RES/ACC SW on
Approx. 630 ohm with the SET/COAST SW on
C15 CRUISE CONTROL ECU
9 - GROUND : Approx. 12 volts with the ignition SW at ON position
12 - GROUND : 4 pulses with 1 rotation of rotor shaft
10 - GROUND : Approx. 1540 ohm with the CANCEL SW on in the control SW
Approx. 630 ohm with the SET/COAST SW on in the control SW
Approx. 240 ohm with the RES/ACC SW on in the control SW
16 - GROUND : Always continuity