Vehicle Speed Sensor: Service and Repair

Vehicle Speed Sensor NO.1 on-vehicle repair

Vehicle Speed Sensor NO.1 A340E:

1. DISCONNECT NO.1 VEHICLE SPEED SENSOR CONNECTOR
2. REMOVE NO.1 VEHICLE SPEED SENSOR ASSEMBLY
a. Remove the bolt and No.1 vehicle speed sensor assembly.
b. Remove the speedometer driven gear and O-ring from the No.1 vehicle speed sensor.

Vehicle Speed Sensor NO.1 A340F:

3. INSTALL NO.1 VEHICLE SPEED SENSOR ASSEMBLY

a. Coat a new O-ring with ATF.
b. Install the O-ring and speedometer driven gear to the No.1 vehicle speed sensor.
c. Install the No.1 vehicle speed sensor to the extension housing and torque the bolt.

Torque: 16 Nm (160 kgf-cm, 12 ft. lbs.)

4. CONNECT NO.1 VEHICLE SPEED SENSOR CONNECTOR

Vehicle Speed Sensor NO.2 A340E:

Vehicle speed Sensor NO.2 on-vehicle repair


1. DISCONNECT NO.2 VEHICLE SPEED SENSOR CONNECTOR
2. REMOVE NO.2 VEHICLE SPEED SENSOR

a. Remove the bolt and No.2 vehicle speed sensor.
b. Remove the O-ring from the No.2 vehicle speed sensor.

3. INSTALL NO.2 VEHICLE SPEED SENSOR

a. Coat a new O-ring with ATF and install it to the No.2 vehicle speed sensor.
b. Install the No.2 vehicle speed sensor and torque the bolt.

Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)

Vehicle Speed Sensor NO.2 A340F:

4. CONNECT NO.2 VEHICLE SPEED SENSOR CONNECTOR