Fuel Pump: Service and Repair

Fuel Pump:

REMOVAL

CAUTION: Do not smoke or work near an open flame when working on
the fuel pump.

1. REMOVE FUEL TANK

2. REMOVE FUEL PUMP BRACKET ASSEMBLY FROM FUEL TANK




a. Disconnect the fuel pump connector from the clamp.

b. Remove the 8 bolts.
Torque: 3.5 N.m (36 kgf.cm, 31 in.lbf)




c. Pull out the pump bracket assembly.
d. Remove the gasket from the pump bracket.

HINT: At the time of installation, please refer to the following items.
Install a new gasket to the pump bracket.




3. REMOVE FUEL PUMP FROM FUEL PUMP BRACKET
a. Disconnect the fuel pump connector.
b. Pull off the lower side of the fuel pump from the pump bracket.
c. Disconnect the fuel hose from the fuel pump, and remove the fuel pump.
d. Remove the rubber cushion from the fuel pump.




4. REMOVE FUEL PUMP FILTER FROM FUEL PUMP
a. Remove the clip.

HINT: At the time of installation, please refer to the following items.
Install the pump filter with a new clip.

b. Pull out the pump filter.

INSTALLATION
Installation is in the reverse order of removal.