Service Hints

E3 (A), E4 (B), E6 (D), E7 (E) ENGINE CONTROL MODULE
IGSW - E1 : 9.0 - 14.0 volts with ignition SW at ON or ST position
BATT - E1 : Always 9.0 - 14.0 volts
STP - E1 : 7.5 - 14.0 volts with brake pedal depressed
: Below 1.5 volts with brake pedal released

C16 CRUISE CONTROL SW [COMB. SW]
5 - 3 : Approx. 1540 ohms with CANCEL SW on
Approx. 240 ohms with RES/ACC SW on
Approx. 630 ohms with SET/COAST SW on