| Body Clearance | | Standard | 0.07 - 0.15 Millimeter (mm) |
| | Maximum | 0.3 Millimeter (mm) |
| Tip Clearance | | Standard | 0.11 - 0.14 Millimeter (mm) |
| | Maximum | 0.3 Millimeter (mm) |
| Side Clearance | | Standard | 0.02 - 0.05 Millimeter (mm) |
| | Maximum | 0.1 Millimeter (mm) |
| Pump Body Bushing Inside Diameter | | Maximum | 38.19 Millimeter (mm) |
| Stator Shaft Bushing Inside Diameter | Front SIde | Maximum | 21.58 Millimeter (mm) |
| Rear Side | Maximum | 27.08 Millimeter (mm) |
| Drive Gear and Driven Gear Thickness | | Mark 1 | 9.440 - 9.449 mm |
| | Mark 2 | 9.450 - 9.459 mm |
| | Mark 3 | 9.460 - 9.470 mm |
| | Mark 4 | 9.471 - 9.480 mm |
| | Mark 5 | 9.481 - 9.490 mm |
| Stator Shaft x Oil Pump Body | | | 10 Newton Meter (Nm) |
| Oil Pump x Transmission Case | | | 22 Newton Meter (Nm) |