Coolant Temperature Sensor/Switch (For Computer): Service and Repair

ENGINE COOLANT TEMPERATURE (ECT) SENSOR





1. REMOVE NO.2 TIMING BELT COVER

2. REMOVE FUEL PIPE




3. REMOVE ECT SENSOR
a. Disconnect the ECT sensor connector.
b. Using a 19 mm deep socket wrench, remove the ECT sensor and gasket.


4. REINSTALL ECT SENSOR
a. Install a new gasket to the ECT sensor.
b. Using a 19 mm deep socket, install the ECT sensor.

Torque: 20 N.m (200 kgf.cm, 14 ft.lbf)

c. Connect the ECT sensor connector.

6. REINSTALL FUEL PIPE
Install the fuel pipe with 4 new gaskets and the 2 union bolts.

Torque: 34.3 N.m (350 kgf.cm, 25 ft.lbf)

5. REINSTALL NO.2 TIMING BELT COVER