Component Tests and General Diagnostics

INSPECTION







1. INSPECT IGNITION SWITCH CONTINUITY
If continuity is not as specified, replace the switch.







2. INSPECT KEY UNLOCK WARNING SWITCH CONTINUITY
If continuity is not as specified, replace the switch.




3. Key unlock warning system:
INSPECT COMBINATION METER OPERATION
a. Disconnect the connector from the combination meter.
b. Ground terminal 1 and 10 on the wire harness side connector.
c. Check the buzzer sounds.
d. Disconnect the negative (-) lead from the body ground to terminal 1 or 10.
e. Check that the buzzer stops sounding.
If operation is not as specified, replace the combination meter.




4. INSPECT COMBINATION METER CIRCUIT