Transmission Adaptor

DISASSEMBLY





1. REMOVE RETAINER
Remove the 4 bolts, retainer and gasket.





2. REMOVE SELECT RETURN SPRING
3. REMOVE OIL RECEIVER
a. Using snap ring pliers, remove the snap ring.
b. Remove the oil receiver.





4. REMOVE OIL SEAL
Using a screwdriver, remove the oil seal.





5. REMOVE BEARING
Using SST and a hammer, remove the bearing.
SST 09950-60010 (09951-00580), 09950-70010 (09951-07100)

REASSEMBLY





1. INSTALL BEARING
Using SST and a hammer, install a new bearing.
SST 09950-60010 (09951 -00650), 09950-70010 (09951-07100)





2. INSTALL OIL SEAL
Using SST and a hammer, install a new oil seal.
SST 09950-60010 (09951 -00580), 09950-70010 (09951 -07100)
Oil seal in depth: 2.0 ± 0.2 mm (0.078 ± 0.008 inch)
3. INSTALL OIL RECEIVER
a. Install the oil receiver.
b. Using snap ring pliers, install the snap ring.





4. INSTALL SELECT RETURN SPRING





5. INSTALL RETAINER
Install a new gasket and the retainer with the 4 bolts.
Torque: 19 Nm (195 kgf-cm, 14 ft. lbs.)