Front Door Belt Moulding Assy LH
REPLACEMENTHINT:
- Installation is in the reverse order of the removal. But, the installation is indicated only when it has a point.
- In the RH side, work in the same procedure as in the LH side.
1. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY
2. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH
3. REMOVE DOOR PULL HANDLE
4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
5. REMOVE FRONT DOOR BELT MOULDING ASSEMBLY LH
a. Remove the screw.
b. Put protective tape under the front door belt moulding assembly LH.
c. Using a moulding remover or scraper, remove the front door belt moulding assembly LH.