Rear Door Belt Moulding Assy LH

REPLACEMENT

HINT:
- Installation is in the reverse order of the removal. But, the installation is indicated only when it has a point.
- In the RH side, work in the same procedure as in the LH side.

1. REMOVE DOOR PULL HANDLE

2. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH




3. REMOVE REAR DOOR BELT MOULDING ASSEMBLY LH
a. Remove the screw.
b. Put protective tape under the rear door belt moulding assembly LH.
c. Using a moulding remover or scraper, remove the rear door belt moulding assembly LH.