Drive Belt Replacement
REPLACEMENT1. REMOVE FRONT WHEEL RH
2. REMOVE FRONT FENDER SPLASH SHIELD FRONT RH
3. REMOVE FRONT FENDER APRON SEAL RH
4. REMOVE ENGINE MOUNTING STAY NO. 2 RH
5. REMOVE ENGINE COVER SUB-ASSY NO. 1
6. REMOVE ENGINE MOVING CONTROL ROD W/ BRACKET
a. Remove the 3 bolts and engine mounting control rod w/ bracket.
7. REMOVE ENGINE MOUNTING BRACKET NO. 2 RH
8. REMOVE FAN AND GENERATOR V BELT
a. Turn the drive belt tensioner slowly clockwise, and remove the drive bolt by using SST.
SST 09249-63010
9. INSTALL FAN AND GENERATOR V BELT
a. Turn the drive belt tensioner slowly clockwise, and install the drive bolt by using SST.
SST 09249-63010
10. INSTALL ENGINE MOUNTING BRACKET NO. 2 RH
Torque: 52 Nm (531 kgf-cm, 38 ft. lbs.)
11. INSTALL ENGINE MOVING CONTROL ROD W/ BRACKET
a. Install the engine mounting control rod with the 3 bolts w/bracket.
Torque: 64 Nm (653 kgf-cm, 47 ft. lbs.)
12. INSTALL ENGINE MOUNTING STAY NO. 2 RH
Torque: 64 Nm (653 kgf-cm, 47 ft. lbs.)
13. INSTALL FRONT WHEEL RH
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)